BW Honeywell - Icon+ Yellow
Serviceable four-gas detector with a choice of six sensors — Honeywell BW™ Icon+ delivers an icon-based experience in a serviceable package. It enables you to maximize the lifespan of your four-gas detectors, optimize long-term cost of ownership and select from multiple gas sensors for flexible applications. Like the fixed-life Honeywell BW™ Icon, Honeywell BW™ Icon+ is named for its firstin-the-industry display of simple icons for gas levels and device status. That means no live gas readings for workers to interpret and no time-consuming training. Instead, when there’s a gas alarm, the bell icon on the display will illuminate, along with an indicator next to the sensor in alarm, so workers can quickly clear the area.
| Size | 108.2 mm x 61.5 mm x 43.2 mm (4.29 in x 2.44 in x1.7 in) with Alligator Clip 108.2 mm x 61.5 mm x 37.8 mm (4.29 in x 2.44 in x 1.49 in) with Klick Fast Stud |
| Weight | 185 g (6.5 oz) with Alligator Clip, 169 g (6 oz) with Klick Fast Stud |
| Operating Temperature | -40°C to 60°C (-40°F to 140°F) |
| Humidity | 5% to 95% |
| Ingress Protection | IP66, IP68 |
| Alarms and Type | Visual, vibrating, audible (95 dB); Low, High, TWA, STEL, Negative Drift, Over Limit, Multi-alarm |
| Self-Test | Perform diagnostic of sensor, circuitry on activation; Activated detector automatically performs analog sensor diagnostic every 10 minutes, digital sensor diagnostic every second |
| Typical Battery Life | Two months (with NDIR CH4 sensor) |
| Event Logging | Bluetooth® Low Energy (BLE) – Ability to connect to Honeywell’s Safety Communicator App, Device Configurator App and Safety Suite Device Configurator Software |
| User Options | • Change High, Low, TWA and STEL alarm set points • Latching alarms • Set Calibration and/or bump test reminders • Assign worker and location assignments • Always on User options only available via Device Configurator and Safety Suite Device Configurator |
| Certifications and Approvals | ATEX, IEC Ex, contains FCCID, contains IC |
| Warranty | Three-year warranty for sensors and detector |
Sensor Specifications
| Gases | Standard Measuring Range | Resolution |
| CO | 0 to 2000 ppm | 1 ppm |
| H2S | 0 to 2000 ppm | 1 ppm (can set to 0.1 ppm) |
| SO2 | 0 to 150 ppm | 0.1 ppm |
| O2 | 0 to 30 VOL | 0.1% VOL |
| NSIR-CH4 | 0 to 100% LEL | 1% LEL |
*Caution: The infrared LEL sensor used in Honeywell BW™ Icon cannot detect hydrogen and acetylene. For applications involving these combustible gases, consider a catalytic-bead LEL sensor as found in the Honeywell BW™ MicroClip Series.
Features
Reliable
- Two months of battery runtime on a 4.5-hour charge — and up to four months if you turn off the detector at the end of each shift. No daily charging, no unexpected downtime.
Compatible
- The Honeywell BW™ Icon+ is compatible with the IntelliDoX instrument management system and Honeywell Safety Suite and also with TouchConnect™ using Bluetooth® for wireless configuration.
Accurate
- Low-power infrared LEL sensor is immune to silicone poisoning, which means accurate monitoring of combustibles.
Easy to Manage
- The IntelliFlash™ green light indicates when the detector is in compliance and the amber light indicates the need for maintenance
Responsive
- 1series sensors respond to dangerous gas levels in seconds, even in harsh temperatures.
Easy to use
- Small, lightweight and wearable. One-button operation.
