PIP - Heavy Duty Unsupported Latex Gloves #47-L422
Latex should not be used for contact with hydrocarbon based oils or solvents, and it is possible for some users to have intolerance to the material.
PIP - Heavy Duty Unsupported Latex Gloves #47-L422
Thse heavy duty gloves are perfect for chemical applications, fishing, agriculture, mining, sandblasting/pellet blasting, sanitaion, and pot sink applications. They are unlined to reduce the potential of product contamination. They are extra thick for protection and abrasion resistance and anatomically shaped to provide a good fit.
Latex provides good resistance to numerous acids and ketones, is flexible and is tear and snag resistant. However, latex should not be used for contact with hydrocarbon based oils or solvents, and it is possible for some users to have intolerance to the material.
CHEMICAL PERMEATION
The chemical permeation of our product is measured in accordance to European Standard EN 374-3. This measures the resistance of protective gloves against chemicals and microorganisms. Part 3 of the standard determines the level of resistance to permeation by chemicals.
BREAKTHROUGH TIME (BTT)
The number of minutes from initial contact with a test chemical until it is first detected on the inside of the glove.
BREAKTHROUGH TIME - PROTECTION INDEX
Each chemical tested is classified in terms of breakthrough time (performance level 0 to 6).
CAUTION: This information is provided as an aid in determining the general suitability of various products for use with specific chemicals. These recommendations are advisory only and the SUITABILITY OF THE PRODUCT FOR A SPECIFIC APPLICATION OR ENVIRONMENT MUST BE DETERMINED BY THE PURCHASER OR USER OF THE PRODUCT. This information should be used as a guide only.
CHEMICAL NAME |
LEVEL |
BTT |
|---|---|---|
| Acetic acid, 10% |  |
>480 MIN |
| Acetic acid, 20% | |
>480 MIN |
| Acetic acid, 25% | |
>480 MIN |
| Acetic acid, glacial | |
>480 MIN |
| Ammonium hydroxide, 25% | |
>480 MIN |
| Cyclohexane |  |
75 MIN |
| Cyclohexanone |  |
256 MIN |
| Ethyl acetate | |
72 MIN |
| Ethyl alcohol | |
>480 MIN |
| Hydrogen chloride, 10% | |
>480 MIN |
| Hydrogen chloride, 37% |  |
210 MIN |
| Isopropyl alcohol | |
>480 MIN |
| Methyl alcohol |  |
32 MIN |
| n-Heptane | |
53 MIN |
| n-Hexane | |
50 MIN |
| n-Propyl acetate | |
75 MIN |
| n-Propyl alcohol | |
>480 MIN |
| Nitric acid, 10% | |
>480 MIN |
| Nitric acid, 40% | |
>480 MIN |
| Phosphoric acid, 85% | |
>480 MIN |
| Potassium hydroxide, 50% | |
>480 MIN |
| Sodium hydroxide, 20% | |
>480 MIN |
| Sodium hydroxide, 40% | |
>480 MIN |
| Sodium hydroxide, 50% | |
>480 MIN |
| Sodium hypochlorite | |
>480 MIN |
| Sodium silicate | |
>480 MIN |
| Sulfuric acid, 40% | |
>480 MIN |
| Sulfuric acid, 50% | |
>480 MIN |
| Sulfuric acid, 96% | |
74 MIN |
| Thinner | |
39 MIN |
| Toluene | |
54 MIN |
| Xylene | |
185 MIN |
| Available Sizes | PIP Product Numbers |
| Medium | 47-L422/M |
| Large | 47-L422/L |
| X-Large | 47-L422/XL |
