The PARAT® filtering escape hoods were developed with users, placing the focus on the fastest possible escape. Optimized operation and wearing comfort, a robust case and a sealed filter ensure protection from toxic industrial and/or fire-related gases, vapors and particles for at least 15 minutes.
Exceptionally innovative and intuitive: When opening the soft pack or hard case packaging, the filter plug is automatically released from the filter. The filter is then deployed into operational position and the hood can be immediately donned. Thanks to the self-adjusting internal head harness, no additional adjustment is required. All you have to do is open the packaging, remove and don the hood– and leave the danger zone.
Reliable protection -
Choose from fire escape, industrial escape or a combination of fire and industrial escape. The high-performance combination filter reliably protects against a wide range of fire and/or toxic industrial gases, vapors and particles – depending on the version. The filters are approved according to the EN standard 403:2004 for fire escape hoods and/or the DIN standard 58647-7 for industrial filtering escape devices. Additionally, the industrial versions are tested in accordance with NIOSH 42 CFR Part 84 and the EN standard 14387:2004 for gas and combined filters. To keep the filter safe over its long lifetime, it is tightly sealed with two filter plugs.
16 years of service life -
Replacing the filter after eight years will extend the service life of the Dräger PARAT Escape Hood to 16 years in total. For this, Dräger offers filter replacement service or expert training for your employees.
Robust and ergonomic -
Both ergonomics and wearing comfort were considered when designing the soft pack and hard case packaging of the Dräger PARAT Escape Hoods. The escape hood can be carried with a belt, shoulder strap, grip clip or belt clip. The PARAT Hard Case can also be mounted on the wall using a wallholder. Additionally, the robust packaging of the Dräger PARAT Escape Hoods protects the device from damage.
Different packaging types -
You can select between different packaging types: The hard case provides splash water protection (IP54)– the soft pack provides ingress dust protection (IP5). Both packaging types have a viewing window to check the filter expiration date and the condition of the device. Particularly convenient: The security seal on the packaging shows if the unit has been opened.
Hard Pack - Industrial and Fire Combination Escape Hood
Use: protection against toxic industrial gases, vapors, particles, and fire-related gases
Filter: ABEK CO P3 Filter
Approval: according to EN 403:2004 for fire escape hoods; according to DIN 58647-7 for filtering escape devices; filter additionally tested in accordance with EN 14387:2004 for gas filter(s) and combined filter(s)
